CFS/CCS-BA-e-1624 39
9.2 Tolerance check for target quantity
Press , the active tolerance weighing mode is indicated.
If needed, select tolerance control for target weight (PSt nEt) with or
(models CFS 50K-3).
Display example model CFS 6K0.1:
Press the TARE key , which shows the currently set upper threshold.
To change, input the desired value, e.g. 100 pieces, with the numeric keys.
Confirm with TARE key; the currently adjusted minimum threshold will be
displayed.
To change, input the desired value, e.g. 90 pieces, with the numeric keys.
Confirm with TARE key, the tolerance control will start.
The indicator
above appears.
To Next Page
Loading...
Need help?
General
