CFS/CCS-BA-e-1624 37
9.1 Tolerance check for target weight
Press , the active tolerance weighing mode is indicated.
If needed, select tolerance control for target weight (PSt nEt) with or
(models CFS 50K-3).
Display example model CFS 6K0.1:
Press the TARE key , which shows the currently set upper threshold.
To change, input desired value, e.g. 5.500 kg with the numeric keys.
Confirm with TARE key; the currently adjusted minimum threshold will be
displayed.
To change, input desired value, e.g. 5,0000 kg with the numeric keys.
Confirm with TARE key, the tolerance control will start.
The indicator [
] above appears.
To Next Page
Loading...
