TEFC_A-BA-e-2110 21
8.4 Weighing with tare
The empty weight of any container used for weighing can be tared, pressing the button
which results in displaying the net weight of the weighed material during consecutive
weighing processes.
Place the scale container on the scale plate.
Wait until the stabilization indicator is displayed and press TARE. The con-
tainer weight is saved in the scale memory. The zero indicator and “NET” symbol
will be displayed.
“NET” indicates all displayed weight values are net values.
Place the weighed material.
Wait until the stabilization indicator is displayed .
Read out the net weight.
• After the load is removed from the scal
e, the tare weight is displayed as
a negative value.
•
To delete the saved tare value, remove the load from the scale plate and
press TARE button.
•
The taring process can be repeated any number of times, e.g. when
weighing several mixture
ingredients (making up the weight). The limit is
reached when the complete taring scope is used.
8.5 Weight unit switching
The scale is factory-set to <kg>. You can change to <lb> in the menu.
Press MODE and hold it for 3 s until < > is displayed.
Using the TARE button, choose the < > setting.
Confirm by pressing M.
Press MODE to leave the menu, the scale will switch to the weighing mode
again.
To Next Page
Loading...
Need help?
General
