KERN EFC 30K-3 User Manual

TEFC_A-BA-e-2110 23
8.7 Test weighing
The function is available starting from weight values above 20 d.
Activating the test weighing mode:
 In the weighing mode, press TOL, < > will be displayed.
 Pressing TOL enables to switch between < > and < >.
< > function deactivated
< > function activated
8.7.1 Test weighing
The <Test weighing> application enables to determine the upper and lower limit value
and, consequently, to ensure the weight of the weighed material belongs to the range
between the determined tolerance limits.
Exceeding the limit values (fall below and rise above) is signaled with a visual indica-
tion and an audible indication.
Visual signal:
The LED at the right edge of the symbol provides the following information:
The weighed material above the preset limits
Weighed material in the preset limit range
The weighed material below the preset limits

KERN EFC 30K-3 Specifications

General

Brand	KERN
Model	EFC 30K-3
Category	Scales
Language	English