28 TEFC_A-BA-e-2110
8.8 Summing
The function enables to add individual weighing values to the total memory by press-
ing the button.
The function is available starting from weight values above 20 d.
Summing the weighed material:
Whenever required, place an empty container on the scale and tare it.
Place the first weighed material. Wait until the stabilization indicator is displayed
and then press M. The weight value will be saved. Red LED above TOTAL will be
lit.
Remove the weighed material. The subsequent weighed material can be added
only when the indication ≤ zero.
Place the second weighed material. Wait until the stabilization indicator is dis-
played and then press M. The weight value will be added to the total memory. The
total will be displayed alternately with the currently placed weight for ca. 2 s.
Whenever required, add the subsequent weighed material as described above.
Load should be removed from the scale between consecutive weighing proce-
dures.
This process may be repeated 99 times until you reach the scale weighing range.
Displaying the “total” value:
When zero is displayed, press M. The total weight will be displayed for ca. 2 s.
Deleting the total memory:
When zero is displayed, press the M button. When the total weight is displayed,
press MODE.
To Next Page
Loading...
Need help?
General
