KERN KFB-TM - Switch-Over Weighing Unit (Only Not Verifiable Weighing Systems)

26 KFB/KFN-TM-BA_IA-e-1624
7.5 Switch-over weighing unit (only not verifiable weighing systems)
How to enable weighing units:
 Call-up menu item P5 Unt, see chap. 8.1
 Press and the first weighing unit with the current setting
will be displayed.
 To enable [on] / disable [off] the displayed weighing unit,
press

 Acknowledge with . The next unit with the current setting
will be displayed.
 To enable [off] / disable [on] the displayed weighing unit,
press .
 Acknowledge with .
 Repeat sequence for each weighing unit.
Note:
„tj“ and „Hj“ cannot be activated at the same time, only either
... or ... .
 Return to weighing mode using
Switch-over weighing unit:
 Keep pressed, the display changes over to the
weighing units activated before (e.g. kg  lb)
