KERN KFB-TM - Tolerance Check for Target Quantity

KFB/KFN-TM-BA_IA-e-1624 31
7.7.2 Tolerance check for target quantity
Settings
 Press and at the same time in weighing mode.

 Press until the display for entering the lower limit value
appears.
 Press , the current setting will be displayed.
 To enter the lower limit, e. g. 75 items, press the navigation
buttons (see chap. 2.1.1); the currently enabled digit will be
flashing.
 Confirm input by .
 Press repeatedly until is displayed.
 Press , the current setting for the upper limit will be
displayed.
 To enter the upper limit, e. g. 100 items, press the navigation
buttons (see chap. 2.1.1); the currently enabled digit will be
flashing.
 Confirm input by .
 Press repeatedly until is displayed.
 Press
and the current setting for the acoustic signal will
be shown.
 Select desired setting (no, ok, ng) by .
 Confirm input by .