KERN KFB-TM User Manual

KFB/KFN-TM-BA_IA-e-1624 33
7.8 Manual totalizing
With this function the individual weighing values are added into the summation
memory by pressing and edited, when an optional printer is connected.
• Menu setting:
„P1 COM“ or „P2 COM“  „MODE“  „PR2““, see chap. 8
• The totalizing function is not active when the weight is under 20d.
Add up:
 Place weighing goods A.
Wait until the stability display STABLE appears, then press . The weight value
will be saved and printed if an optional printer is connected.
 Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.
 Place goods to be weighed B.
Wait until the stability display appears, then press . Weighing value will be
added to summation memory and possibly printed.
The number of weighing actions, followed by the total weight will be displayed for
2 sec.
 Add more weighed goods as described before.
Please note that the weighing system must be unloaded between the individual
weighing procedures.
 This process may be repeated 99 times or till such time as the capacity of the
weighing system has been exhausted.
Display and output sum „Total“:
 Press , number of weighing, followed by the total weight will be displayed for
2 sec. Press to print out this display.

KERN KFB-TM Specifications

General

Brand	KERN
Model	KFB-TM
Category	Monitor
Language	English