KERN PFB Series User Manual

6 PFB-BA-e-1630
KERN PFB 600-1NM PFB 600-2NM
Trademark PFB 600-1M PFB 600-2M
Readability (d) 0.1 g 0.01 g
Weighing range (max) 600 g 600 g
Reproducibility 0.1 g 0.01 g
Linearity ± 0.1 g ± 0.02 g
Verification value (e) 100 mg 100 mg
Verification class II II
Minimum load (Min) 5 g 500 mg
Smallest part weight for
parts counting
20 mg 20 mg
Reference quantities at
parts counting
10, 20, 50, 100, 200
Weighing Units g g, ct
Recommended adjustment
weight, not added (class)
600 g (F1) 600 g (F1)
Warm-up time 30 minutes 2 hours
Stabilization time (typical) 3 sec.
Operating temperature + 5° C .... + 35° C
Humidity of air max. 80 % (not condensing)
Housing (B x D x H) mm
190 x 220 x 140
(with draft shield)
190 x 220 x 60
(without draft shield)
Draft shield (B x D x H) mm 158 x 143 x 64 (inside)
167 x 154 x 80 (outside)
Weighing plate, stainless steel
(mm)
Ø 120
Weight kg (net) 2 kg
Voltage 12 V / 500 mA
Bluetooth (Factoryoption) Scope: 10 m

KERN PFB Series Specifications

General

Calibration	External calibration
Weighing Units	ct, g, kg, lb, mo, oz, pcs, t
Display	LCD with backlight
Power Supply	AC adapter or rechargeable battery
Material	Stainless steel
Dimensions	Varies by model
Overall dimensions	Varies by model
Readability	0.1 g - 1 g
Readability [d]	0.1 g - 1 g