30 PFB-BA-e-1630
7.3.2 Models PFB-M
Start balance by pressing
The balance will carry out a self-test.
Wait for „0.0“ display.
Press .
Appears the reference quantity „10“
By pressing the key several times, the
reference quantities 10, 20, 50, 100, 200 can be set.
(example)
Place as many parts to count on the weighing plate
as the set reference quantity requires.
Confirm by pressing
The balance is now in parts counting mode and counts
all units on the weighing plate.
Press .
The balance is in weighing mode and displays the
weight of the counted parts.
Remove the counted parts
Press , the balance goes to weighing mode
To Next Page
Loading...
