KERN PFB Series User Manual

PFB-BA-e-1630 17
 Put on weight 1 (see table chap. 6.8.1)
 Wait for the stability display and the signal sound
 „LoAd 2“ appears
 Remove weight 1 and put on the weight 2
 After the stability display and the signal sound
„LoAd 3“ appears; remove weight 2 and put on
weight 3
 After the stability display and the signal sound
„LoAd 4“ appears; remove weight 3 and put on
weight 4
 After having placed weight 4, „LoAd 0“ appears
again
 Remove weight 4, „LoAd 4“ appears anew
 Place weight 4 again
 Wait for the stability display and the signal
sound, „LoAd 3“ will be displayed
 Remove weight 4 and place weight 3
 Wait for the stability display and the signal
sound, „LoAd 2“ will be displayed
 Remove weight 3 and place weight 2
 Wait for the stability display and the signal
sound, „LoAd 1“ will be displayed
 Remove weight 2 and place weight 1
 Wait for the stability display and the signal sound
 „LoAd 0“ will be displayed
 Remove weight 1
 After the stability display and the signal sound
the balance carries out a selftest and changes
into the weighing mode. Now the linearization is
concluded successfully.

KERN PFB Series Specifications

General

Calibration	External calibration
Weighing Units	ct, g, kg, lb, mo, oz, pcs, t
Display	LCD with backlight
Power Supply	AC adapter or rechargeable battery
Material	Stainless steel
Dimensions	Varies by model
Overall dimensions	Varies by model
Readability	0.1 g - 1 g
Readability [d]	0.1 g - 1 g