KERN PLJ Series User Manual

ALJ/ALS/PLJ/PLS-BA-e-1741 27
5 Basic Safety Precautions
5.1 Pay attention to the instructions in the Operation Manual
Carefully read this operation manual before setup and
commissioning, even if you are already familiar with KERN
balances.
Versions in other languages are non-binding translations.
The only binding version is the original document in German.
5.2 Personnel training
The appliance may only be operated and maintained by trained personnel.
6 Transportation & Storage
6.1 Testing upon acceptance
When receiving the appliance, please check packaging immediately, and the
appliance itself when unpacking for possible visible damage.

KERN PLJ Series Specifications

General

Weighing plate material	stainless steel
Minimum part weight at piece counting	0.1g - 2g (depending on model)
Stabilisation time under laboratory conditions	2 seconds
Permissible ambient temperature	10 °C - 40 °C
Interface	RS-232
Units	g, kg, lb, oz