KERN PLJ Series User Manual

ALJ/ALS/PLJ/PLS-BA-e-1741 79
12.5 Format for data transmission
At stable weight the format is transferred after pressing the PRINT button.
Weighing mode (continuous output and remote control command)
1° 2° 3° 4° 5° 6° 7° 8° 9° 10° 11° 12° 13° 14° 15°r
Character Weight Weighing unit Stability
CR LF
Density determination (only remote control command)
1° 2° 3° 4° 5° 6° 7° 8° 9° 10° 11° 12° 13° 14° 15° 16° 17°
d
=
Density
Blank
Weighing unit CR LF
Counting (only remote control command)
Number of pieces
1°. 2° 3° 4° 5° 6° 7° 8° 9° 10° 11° 12° 13° 14° 15° 16°
Pcs : Blank
Quantity
Weight of placed pieces
1°. 2° 3° 4° 5° 6° 7° 8° 9° 10° 11° 12° 13° 14° 15° 16° 17° 18° 19° 20°
Weight : space Measuring Value space g space S
Average parts weight
1°. 2° 3° 4° 5° 6° 7° 8° 9° 10° 11° 12° 13° 14° 15° 16° 17° 18°
PMU
average piece
weight
: Blank Measuring Value
space g

KERN PLJ Series Specifications

General

Weighing plate material	stainless steel
Minimum part weight at piece counting	0.1g - 2g (depending on model)
Stabilisation time under laboratory conditions	2 seconds
Permissible ambient temperature	10 °C - 40 °C
Interface	RS-232
Units	g, kg, lb, oz