KERN PLJ Series User Manual

ALJ/ALS/PLJ/PLS-BA-e-1741 31
7.2.1 Placing
The right place is decisive for the accuracy of the weighing results of high-
resolution analytical and precision balances (see chap. 8.1).
 Assembly of the balance
Model ALJ 200-5A
Insert grid weighing plate
Place wind protection ring
Connect balance to electronic
box.
In order to prevent heat from
impairing the measuring
results, the electronic system
and the current supply are
installed in the electronic box
separated from the balance.

KERN PLJ Series Specifications

General

Weighing plate material	stainless steel
Minimum part weight at piece counting	0.1g - 2g (depending on model)
Stabilisation time under laboratory conditions	2 seconds
Permissible ambient temperature	10 °C - 40 °C
Interface	RS-232
Units	g, kg, lb, oz