KERN PLJ Series User Manual

ALJ/ALS/PLJ/PLS-BA-e-1741
54
 Press the arrow keys   to select desired setting.
Scroll forward using MENU button
Scroll backward using CAL button
Au0 OFF = Auto Zero switched off
Au0 1 = Auto Zero range ± ½ digit
Au0 2 = Auto Zero range ± 3 digits
Au0 3 = Auto Zero range ± 7 digits
Au0 3E = Auto Zero range ± 7 digits in the whole weighing range
 Take over selection using the PRINT button.
Weighing balance returns to menu. Either make more settings in the menu or go
back to weighing mode as follows.
 Press the MENU button and keep it pressed until the acoustic signal gets mute.
The balance returns automatically into weighing mode.
For models PLJ_M settings are restricted to “Au0 OFF“ and „Au0 1“

KERN PLJ Series Specifications

General

Weighing plate material	stainless steel
Minimum part weight at piece counting	0.1g - 2g (depending on model)
Stabilisation time under laboratory conditions	2 seconds
Permissible ambient temperature	10 °C - 40 °C
Interface	RS-232
Units	g, kg, lb, oz