138 PRS/PRJ/ARS/ARJ-BA-def-0622
9.11 Setup for “SET APP DENSITY”
To activate the menu see Chapter 7.4 “Activating the two main menus” and Chapter 7.5
“How the menu control operates”.
• SETUP
APPLICATION
DENSITY
MODE SOLID ON
BOTTOM
MODE SOLID IN AIR
MODE LIQUID
MODE SOLID POROUS
Solid
Solid
Measure liquids
Porous solid
INDEX ON/OFF
Index on/off
REFERENCE 8000
Reference for INDEX
TIMEBASE 0.0
Timebase for repeat operation in
seconds
REF. DENSITY 0.998205
Density of the liquid used for
measurement (factory setting:
water at 20 °C)
TEMPERATURE 20 C
Temperature in °C of the water
to be used in the measurement
By using the “DENSITY” working program, you can carry out density determination.
• Function key legends on start-up:
“OK”: Accept current reference density
“CAL”: Determine reference density of measuring liquid
“T-H2o”: Set reference density of water at nn.n °C
“20.0C”: Set reference density of water at nn.n °C
To Next Page
Loading...
