PRS/PRJ/ARS/ARJ-BA-def-0622 149
Command Function
Sn Set stability n n=0 low
n=1 medium
n=2 high
SDTttmm-
jjhhmmss
Set date and time (German) (Tag, Monat, Jahr,
Stunde, Minute, Sekunde)
SDTmmd-
dyyhhmmss
Set Date and Time (English) (Month, Day, Year, Hour, Minutes,
Seconds)
T (ttt) Tare off or set tare to a specific value
Uxnn Set unit x (1...4) of the balance with nn (0=g, 1=mg, 2=kg, ...)
UxS Switch balance to unit x (1...4)
ZERO Zero the balance (provided weight is stable and within the zero-
setting range)
NOTE
Each remote-control command must terminate with “CR” “LF”.
The commands are acknowledged if required.
11.4 Examples for the remote control of the balance
Input Description of the initiated function
D – – – – – Five dashes will be shown
D TEST123. Display will be: tESt123
D The display will be dark
T100 -100.000g (tare set to 100 g)
T1 -1.000 g (tare set to 1g)
T Balance will be tared off
Table 8.5 Examples for remote control
To Next Page
Loading...
