8 Keysight E-Series E9300 Operating and Service Guide
Documentation
Sensors covered by this manual
These sensors have a two-part serial number: the prefix (two letters and the first
four numbers), and the suffix (the last four numbers). The two letters identify the
country in which the unit was manufactured. The four numbers of the prefix are a
code identifying the date of the last major design change incorporated in your
sensor. The four-digit suffix is a sequential number and, coupled with the prefix,
provides a unique identification for each unit produced. The contents of this
manual apply directly to all serial numbers unless otherwise indicated.
Related publications
The Keysight E-Series E9300 Power Sensors Operating and Service Guide is also
available in the following language:
Japanese Language Operating and Service Guide - Option ABJ
Further useful information can be found in:
– Application Note 64-1B, Fundamentals of RF and Microwave Power
Measurements, available by ordering through your local Keysight Technologies
Sales Office.
–The Keysight EPM Series Power Meter User’s Guide and Programming Guide.
To Next Page
Loading...
