3 Remote Interface Reference
138 Keysight E364xA User’s and Service Guide
SCPI Conformance Information
The power supply conforms to the ‘1997.0’ version of the SCPI standard. Many of
the commands required by the standard are accepted by the power supply but are
not described in this manual for simplicity or clarity. Most of these non-
documented commands duplicate the functionality of a command already
described in this manual.
SCPI confirmed commands
The following are the SCPI-confirmed commands that are used by the power
supply.
DISPlay
[:WINDow][:STATe] {OFF|ON}
[:WINDow][:STATe]?
[:WINDow]:TEXT[:DATA] <quoted string>
[:WINDow]:TEXT[:DATA]?
[:WINDow]:TEXT:CLEar
INITiate[:IMMediate]
MEASure
:CURRent[:DC]?
[:VOLTage][:DC]?
OUTPut
[:STATe] {OFF|ON}
[:STATE]?
[SOURce]
:CURRent[:LEVel][:IMMediate][:AMPLitude] {<current>|MIN|MAX|UP|DOWN}
:CURRent[:LEVel][:IMMediate][:AMPLitude]? [MIN|MAX]
:CURRent[:LEVel][:IMMediate]:STEP[:INCRement] {<numeric value>|DEFault}
:CURRent[:LEVel][:IMMediate]:STEP[:INCRement]? {DEFault}
:CURRent[:LEVel]:TRIGgered[:AMPLitude] {<current>|MIN|MAX}
:CURRent[:LEVel]:TRIGgered[:AMPLitude]?[MIN|MAX]
To Next Page
Loading...
Need help?
General
