1 Getting Started
40 Keysight E364xA User’s and Service Guide
Rack-mounting the power supply
You can mount the power supply in a standard 19-inch rack cabinet using one of
three optional kits available. Instructions and mounting hardware are included
with each rack-mounting kit. Any Keysight System II instrument of the same size
can be rack-mounted beside the Keysight E3640A, E3641A, E3642A, E3643A,
E3644A, or E3645A.
1 To remove the handle, rotate it to the vertical position and pull the ends
outwards
2 To remove the rubber bumper, stretch a corner and then slide it off.
Remove the carrying handle and the front and rear rubber bumpers before
rack-mounting the power supply.
To Next Page
Loading...
Need help?
General
