3 Remote Interface Reference
140 Keysight E364xA User’s and Service Guide
Device specific commands
The following commands are device- specific to your power supply. They are not
included in the ‘1997.0’ version of the SCPI standard. However, these commands
are designed with the SCPI standard in mind, and they follow all of the command
syntax rules defined by the standard.
APPLy {<voltage>|DEF|MIN|MAX>}[,{<current>|DEF|MIN|MAX}]
APPLy?
CALibration
:COUNt?
:CURRent[:DATA] <numeric value>
:CURRent:LEVel {MIN|MID|MAX}
:CURRent:PROTection
:DAC:ERRor
:SECure:CODE <new code>
:SECure:STATe {OFF|ON},<code>
:SECure:STATe?
:STRing <quoted string>
:STRing?
:VOLTage[:DATA] <numeric value>
:VOLTage:LEVel {MIN|MID|MAX}
:VOLTage:PROTection
OUTPut
:RELay[:STATe] {OFF|ON}
:RELay[:STATE]?
SYSTem
:LOCal
:REMote
:RWLock
To Next Page
Loading...
Need help?
General
