Save/Recall (Setups, Screens, Data) 18
Keysight InfiniiVision 3000 X-Series Oscilloscopes User's Guide 275
• Arbitrary Waveform data (*.csv) — This creates a file of comma-separated
values for the arbitrary waveform points' time and voltage values. See "To
save arbitrary waveforms" on page 279.
• Power Harmonics data (*.csv) — When the power analysis allication is licensed,
this creates a file of comma-separated values for the current harmonics
power analysis results. See the Power Measurement Application User's
Guide for more information.
You can also configure the [Quick Action] key to save setups, screen images, or
data. See "Configuring the [Quick Action] Key" on page 307.
To save setup files
Setup files can be saved to one of 10 internal (\User Files) locations or to an
external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select Setup
(*.scp).
2 Press the softkey in the second position and use the Entry knob to navigate to
the save location. See "To navigate storage locations" on page 280.
3 Finally, press the Press to Save softkey.
A message indicating whether the save was successful is displayed.
Setup files have the extension SCP. These extensions appear when using the File
Explorer (see "File Explorer" on page 295), but they do not appear when using the
Recall Menu.
To save BMP or PNG image files
Image files can be saved to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select 8-bit
Bitmap image (*.bmp), 24-bit Bitmap image (*.bmp), or 24-bit image (*.png).
2 Press the softkey in the second position and use the Entry knob to navigate to
the save location. See "To navigate storage locations" on page 280.
3 Press the Settings softkey.
In the File Settings Menu, you have these softkeys and options:
• Setup Info — setup information (vertical, horizontal, trigger, acquisition, math,
and display settings) is also saved in a separate file with a TXT extension.
To Next Page
Loading...
Need help?
General
