Keysight EXG and MXG X-Series Signal Generators User’s Guide 161
Basic Digital Operation for N5172B/82B with Options 653/655/656/657
Waveform Sequence Softkeys
Assumption: A waveform sequence that has two different segments has been created and stored
(see previous example on page 159).
1. Select the sequence:
Press Mode > Dual ARB > More > Waveform Sequences > highlight the desired sequence >
Edit Selected Waveform Sequence.
2. Change the first segment so that it repeats 100 times:
Highlight the first segment entry and press Edit Repetitions > 100 > Enter.
The cursor moves to the next entry.
3. Change the repetition for the selected entry to 200:
Press Edit Repetitions > 200 > Enter.
4. Save the changes made in the previous steps:
Press More > Name and Store > Enter.
To save the changes as a new sequence:
a. Press More > Name and Store > Clear Text.
b. Enter a file name (for example, SINE100+RAMP200).
c. Press Enter.
The edited sequence saves as a new waveform sequence.
Playing a Waveform Sequence
If you have not created a waveform sequence, refer to “Creating a Waveform Sequence” on
page 159.
1. Select a waveform sequence:
a. Press Mode > Dual ARB > Select Waveform.
b. Highlight a waveform sequence (for this example, SINE100+RAMP200) from the Sequence
On column.
c. Press Select Waveform.
The display shows the currently selected waveform (for example, Selected Waveform:
SEQ:SINE100+RAMP200).
To play a waveform segment individually or as part of a waveform
sequence, the segment must reside in BBG media. See also, “Loading a
Waveform Segment into BBG Media” on page155.
To Next Page
Loading...
Need help?
General
