Keysight EXG and MXG X-Series Signal Generators User’s Guide 7
Models, Options, and Front/Rear Panels for All Models
N5172B/N5182B RF Vector Signal Generators, Options and Features
General Performance Features
— N5172B/82B Electronic Step Attenuator
— 0 to 130 dB in 5 dB steps
— This electronic step attenuator is built-in and is not an option.
— N5172B/82B-UNZ Fast Switching
— Provides faster switching between different frequencies, amplitudes, and waveforms
— Ideal for use in manufacturing when production test throughput must be maximized
— N5172B/82B-1EA High Output Power
— Up to 10 dB more output power than standard performance
— Fast-switching electronic attenuator
—*N5182B-1EQ Low Specified Power, < -110 dBm
— Decreases calibrated power levels from -110 to -127 dBm
— Decreases minimum settable power levels from -110 to -144 dBm
—*N5182B-UNX Low Phase Noise
— Not compatible with N5182B-UNY Enhanced Low Phase Noise Performance
— Up to 10 dB improvement compared to standard phase noise performance
— Low close-to-carrier phase noise
—*N5182B-UNY Enhanced Low Phase Noise Performance
— Not compatible with N5182B-UNX Low Phase Noise
— Up to 10 dB improvement in phase noise performance
— Low close-to-carrier phase noise
— N5172B/82B-302 Avionics License
— Provides the performance needed for testing VOR and ILS (localizer, glide slope, and marker
beacon) receivers
— Provides VOR bearing accuracy ± 0.1 degrees
— Provides ILS Localizer DDM accuracy ± 0.0004 ± 5% of DDM
— Provides ILS Glide Slope DDM accuracy ± 0.0008 ± 5% of DDM
— N5172B/82B-006 Instrument Security and Removable Memory Card
— 8 GB of removable solid state memory (SD card) from rear panel
— Removable storage for generator files
— Several levels of security including disabling USB ports
— N5172B/82B-009 Internal Solid State Memory
To Next Page
Loading...
Need help?
General
