Keysight EXG and MXG X-Series Signal Generators User’s Guide 367
Using Avionics VOR/ILS Softkeys for N5171B/72B and N5181B/82B with Option 302
Using ILS Localizer Softkeys
To set the ILS Localizer left frequency
1. Press Aux Fctn > Avionics > ILS Localizer
2. Press Left/Right
3. Press Left Frequency
(Default <value> is 90 Hz.)
4. Select a <value> in Hz | kHz | MHz | GHz from 0 Hz to 6 MHz.
These softkeys set the frequency of the Left ILS Localizer signal.
To set the ILS Localizer right frequency
1. Press Aux Fctn > Avionics > ILS Localizer
2. Press Left/Right
3. Press Right Frequency
(Default <value> is 150 Hz.)
4. Select a <value> in Hz | kHz | MHz | GHz from 0 Hz to 10 MHz.
These softkeys set the frequency of the Right ILS Localizer signal.
12=109.15 12=331.25 32=111.15 32=331.55
13=109.30 13=332.00 33=111.30 33=332.30
14=109.35 14=331.85 34=111.35 34=332.15
15=109.50 15=332.60 35=111.50 35=332.90
16=109.55 16=332.45 36=111.55 36=332.75
17=109.70 17=333.20 37=111.70 37=333.50
18=109.75 18=333.05 38=111.75 38=333.35
19=109.90 19=333.80 39=111.90 39=331.10
20=109.95 20=333.65 40=111.95 40=330.95
To Next Page
Loading...
Need help?
General
