8 Keysight EXG and MXG X-Series Signal Generators User’s Guide
Models, Options, and Front/Rear Panels for All Models
N5172B/N5182B RF Vector Signal Generators, Options and Features
— Read/write speeds to/from Option 009 internal solid state memory will be faster compared to
Option 006 Instrument Security and Removable Memory Card
— N5172B/82B-012 LO In/Out for Phase Coherency
— Baseband playback synchronization for up to 16 RF vector signal generators
— Mx2 MIMO solutions in four rack units
— Extendable to four phase-coherent RF vector signal generators
— Use with Signal Studio software for LTE, WiMAX™, and WLAN
— N5172B/82B-099 Expanded License Key Upgradeability
— Enables future upgrades via license key for Option 1EA High Output Power,
Option 1EQ Low Specified Power, < -110 dBm, Option UNV Enhanced Dynamic Range, and
Option UNZ Fast Switching
— N5172B/82B-1ER Flexible Reference Input (1 to 50 MHz)
— External Reference Input with a frequency range from 1 to 50 MHz (in multiples of 0.1 Hz)
— N5172B/82B-1EM Move All Connectors to Rear Panel
— All connectors on rear panel
Vector Features
—*N5172B-653 ARB Baseband Generator (60 MHz RF bandwidth, 32 Msa)
— Dual, 16-bit hardware oversampling DACs running at 800 MHz for I and Q symbols
— Up to 16 bits of dynamic range
— Arbitrary waveform generation and sequencing
—*N5172B-655 Upgrade ARB Baseband Generator from 60 to 120 MHz RF Bandwidth
— Requires N5172B-653 ARB Baseband Generator (60 MHz RF bandwidth, 32 Msa)
— Dual, 16-bit hardware oversampling DACs running at 800 MHz for I and Q symbols
— Up to 16 bits of dynamic range
— Arbitrary waveform generation and sequencing
—*N5172B-657 Upgrade ARB Baseband Generator from 120 to 160 MHz RF Bandwidth
— Requires N5172B-655 Upgrade ARB Baseband Generator from 60 to 120 MHz RF Bandwidth
— Dual, 16-bit hardware oversampling DACs running at 800 MHz for I and Q symbols
— Up to 16 bits of dynamic range
— Arbitrary waveform generation and sequencing
—*N5182B-656 ARB Baseband Generator (80 MHz RF Bandwidth, 32 Msa)
To Next Page
