1Getting Started
2 U2000 Series Operating and Service Guide
Introduction
The Keysight U2000 Series USB power sensor are standalone power
sensors used for measuring the average power of continuous wave (CW)
and modulated signals in 9 GHz to 24 GHz frequency range and –60 dBm
to +44 dBm power range. The power sensors provide an easy
plug- and- play USB connectivity to a PC or laptop, thus eliminating the
need for a separate conventional power meter. The power sensors also
compatible with some selected USB- based instruments from Keysight.
The figure below shows the Keysight U2000 Series USB power sensors
family.
To Next Page
Loading...
Need help?
General
