2 Base Matrix Configuration
62 Keysight 34934A User’s Guide
Note that each row signal (R1 through R4 (H,L) for each Matrix (1, 2) is routed out
on two pins on the extension headers. You can make row signal connections to
either row (upper, lower) of the connector.
If you are going to create an expanded-row matrix using multiple modules and
configuration blocks, plan your wiring placement for each configuration block
carefully, to allow for a daisy-chain interconnection between configuration
blocks—in addition to any row wiring you may connect to the expansion headers.
This interconnection is illustrated in “Arranging Multiple 34934A Modules with
Configuration Blocks” on page 218.
M1 R3L 13 M1 R3L 14 M2 R3L 13 M2 R3L 14
M1 R4H 15 M1 R4H 16 M2 R4H 15 M2 R4H 16
M1 R4L 17 M1 R4L 18 M2 R4L 17 M2 R4L 18
IL1 19 IL2 20 IL3 19 IL4 20
Headers J4, J5 Headers J3, J6
Description Pin Description Pin Description Pin Description Pin
To Next Page
Loading...