Keysight E3631A Service Manual

2Quick Start
34 Keysight E3631A Service Guide
Install the correct fuse and verify that the correct line voltage appears in the
window.
1 Remove the power cord. Remove
the fuse-holder assembly with a
flat-blade screwdriver from the rear
panel.
2 Install the corect line fuse. Remove
the power-line voltage selector from
the power-line module.
3 Rotate the power-line voltage
selector until the correct voltage
appears.
4 Replace the power-line voltage
selector and the fuse-holder
assembly in the rear panel.

Keysight E3631A Specifications

General

Brand	Keysight
Model	E3631A
Category	Power Supply
Language	English