3 Calibration Procedures
88 Keysight E3631A Service Guide
Self-Test Error Messages
[1]
This error message is only applicable for serial MY53xx6xxx.
Error Error Message
601 Front panel does not respond
602 RAM read/write failed
603 A/D sync stuck
604 A/D slope convergence failed
605 Cannot calibrate rundown gain
606 Rundown gain out of range
607 Rundown too noisy
608 Serial configuration readback failed
609
[1]
System ADC test failed
624 Unable to sense line frequency
625 I/O processor does not respond
626 I/O processor failed self-test
630 Fan test failed
631 System DAC test failed
632 P6V hardware test failed
633 P25V hardware test failed
634 N25V hardware test failed
To Next Page
Loading...
