Calibration Procedures 1
Keysight E3632A Service Guide 51
Error Messages
The following tables are abbreviated lists of error messages for the E3632A. The
errors listed are the most likely errors to be encountered during calibration and
adjustment. A more complete list of error messages and descriptions is contained
in “Chapter 4” of the E3632A User's Guide.
System error messages
Table 1-6 System error messages
Error Error Message
-330 Self-test failed
-350 Queue overflow
501 Isolator UART framing error
502 Isolator UART overrun error
503
[a]
[a] This error message is only applicable for serial MY53xx6xxx.
SPI data error
511 RS-232 framing error
512 RS-232 overrun error
513 RS-232 parity error
514 Command allowed only with RS-232
521 Input buffer overflow
522 Output buffer overflow
550 Command not allowed in local
To Next Page
Loading...
