6 Keysight E3632A Service Guide
Safety and EMC Requirements
This power supply is designed to comply with the following safety and
Electromagnetic Compatibility (EMC) requirements:
– IEC61326-1:2005/EN61326-1:2006
– Canada: ICES/NMB-001: Issue 4, June 2006
– Australia/New Zealand: AS/NZS CISPR11:2004
– IEC 61010-1:2001/EN 61010-1:2001
– Canada: CAN/CSA-C22.2 No. 61010-1-04
– USA: ANSI/UL 61010-1:2004
Environmental Conditions
This instrument is designed for indoor use and in an area with low condensation.
The table below shows the general environmental requirements for this
instrument.
Environmental condition Requirements
Temperature
Operating condition
– 0 °C to 40 °C
Storage condition
– –20 °C to 70 °C
Humidity Up to 80% RH
Altitude Up to 2000 m
Installation category II (for indoor use)
Pollution degree 2
To Next Page
Loading...
Need help?
General
