Keysight EDUX1052G - 5 FFT Spectral Analysis; FFT Measurement Hints; FFT Aliasing; 6 Math Waveforms

11
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscope
Service Guide
1 Characteristics and
Specifications
Power Requirements / 11
Measurement Category / 12
Maximum Input Voltages / 13
Environmental Conditions / 13
Specifications / 14
Contact Us / 14
This chapter contains a partial list of characteristics and specifications for the
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G oscilloscopes.
For a full list of oscilloscopes characteristics and specifications see the data
sheets.
The data sheets are available at www.keysight.com/products/DSOX1204G.
Power Requirements
Line voltage, frequency, and power:
• ~Line 100-120 Vac, 50/60/400 Hz
• 100-240 Vac, 50/60 Hz
•50W max
The oscilloscope tolerates mains supply voltage fluctuations up to ±10% of the
nominal voltage.