2 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes Service Guide 
Notices
© Keysight Technologies, Inc. 2008-2022
No part of this manual may be reproduced in 
any form or by any means (including elec-
tronic storage and retrieval or translation into 
a foreign language) without prior agreement 
and written consent from Keysight Technolo-
gies, Inc. as governed by United States and 
international copyright laws.
Manual Part Number
N2137-97049
Edition
August 2022
Available in electronic format only
Published by:
Keysight Technologies, Inc.
1900 Garden of the Gods Road 
Colorado Springs, CO 80907 USA
Warranty
The material contained in this document is 
provided “as is,” and is subject to being 
changed, without notice, in future editions. 
Further, to the maximum extent permitted 
by applicable law, Keysight disclaims all 
warranties, either express or implied, with 
regard to this manual and any information 
contained herein, including but not limited 
to the implied warranties of merchantability 
and fitness for a particular purpose. Key-
sight shall not be liable for errors or for inci-
dental or consequential damages in 
connection with the furnishing, use, or per-
formance of this document or of any infor-
mation contained herein. Should Keysight 
and the user have a separate written agree-
ment with warranty terms covering the 
material in this document that conflict with 
these terms, the warranty terms in the sepa-
rate agreement shall control.
Technology Licenses 
The hardware and/or software described in 
this document are furnished under a license 
and may be used or copied only in accor-
dance with the terms of such license.
U.S. Government Rights
The Software is "commercial computer 
software," as defined by Federal Acquisition 
Regulation ("FAR") 2.101. Pursuant to FAR 
12.212 and 27.405-3 and Department of 
Defense FAR Supplement ("DFARS") 
227.7202, the U.S. government acquires 
commercial computer software under the 
same terms by which the software is 
customarily provided to the public. 
Accordingly, Keysight provides the Software 
to U.S. government customers under its 
standard commercial license, which is 
embodied in its End User License Agreement 
(EULA), a copy of which can be found at 
www.keysight.com/find/sweula. The 
license set forth in the EULA represents the 
exclusive authority by which the U.S. 
government may use, modify, distribute, or 
disclose the Software. The EULA and the 
license set forth therein, does not require or 
permit, among other things, that Keysight: (1) 
Furnish technical information related to 
commercial computer software or 
commercial computer software 
documentation that is not customarily 
provided to the public; or (2) Relinquish to, or 
otherwise provide, the government rights in 
excess of these rights customarily provided 
to the public to use, modify, reproduce, 
release, perform, display, or disclose 
commercial computer software or 
commercial computer software 
documentation. No additional government 
requirements beyond those set forth in the 
EULA shall apply, except to the extent that 
those terms, rights, or licenses are explicitly 
required from all providers of commercial 
computer software pursuant to the FAR and 
the DFARS and are set forth specifically in 
writing elsewhere in the EULA. Keysight shall 
be under no obligation to update, revise or 
otherwise modify the Software. With respect 
to any technical data as defined by FAR 
2.101, pursuant to FAR 12.211 and 27.404.2 
and DFARS 227.7102, the U.S. government 
acquires no greater than Limited Rights as 
defined in FAR 27.401 or DFAR 227.7103-5 
(c), as applicable in any technical data.
A CAUTION notice denotes a hazard. 
It calls attention to an operating 
procedure, practice, or the like that, 
if not correctly performed or 
adhered to, could result in damage 
to the product or loss of important 
data. Do not proceed beyond a 
CAUTION notice until the indicated 
conditions are fully understood and 
met.
A WARNING notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like 
that, if not correctly performed or 
adhered to, could result in personal 
injury or death. Do not proceed 
beyond a WARNING notice until the 
indicated conditions are fully 
understood and met.
 
A newer version of this manual may 
be available at 
www.keysight.com/manuals/ 
DSOX1204G