Keysight N7550A - 3.5 mm ECal Modules and Accessories

6-6 Electronic Calibration Modules Reference Guide
Replaceable Parts
3.5 mm Modules and Accessories
6-
3.5 mm Modules and Accessories
Table 6-5 3.5 mm Modules and Accessories
Description
a
a. See “Clarifying the Terminology of a Connector Interface” on page 1-1.
Qty Part Number
Adapters (added with Option 00A – N469xD only)
3.5 mm -f- to -f- adapter
3.5 mm -m- to -m- adapter
1
1
85052-60012
85052-60014
Protective End Caps
3.5 mm -f-f connector cap (for module)
b
3.5 mm -m-m connector cap (for module)
b
3.5 mm -m-f connector cap (for module)
b
3.5 mm -f- connector cap (for adapter)
c
3.5 mm -m- connector cap (for adapter)
c
b. Available on the N755xA ECals only.
c. These items are not included, but can be ordered separately.
1
1
1
as required
as required
N7550-40001
N7550-40003
N7550-40002
1401-0202
1401-0208
Gages
c
3.5 mm -f- pin-depth gage
d
3.5 mm -m- pin-depth gage
d
d. A 3.5 mm gage is capable of measuring 3.5 mm and 2.92 mm connectors.
1
1
11752-60105
11752-60106
Other
Electronic calibration module reference guide (online)
USB cable A to B, 2 meter
1/2 in to 9/16 in open-ended wrench
c
20 mm, 90 N-cm (8 in-lb) torque wrench
c
5/16 in, 90 N-cm (8 in-lb) torque wrench
c
Spanner wrench
c
Ruggedized plastic storage box for the ECal module and accessories (Option
150)
c
Replacement ruggedized plastic storage box for the ECal module and
accessories
e
e. This item is included, but a replacement can be ordered separately.
1
1
1
1
1
1
1
1
1
N7550-90002
8121-2671
8710-1770
8710-1764
8710-1765
08513-20014
N7550-60009 – Refer
to Table 1-1,
“N755xA
Modules”, on
page 1-6.
1540-2345 – Refer to
Table 1-4,
“N469xD
Modules”, on
page 1-13.