Keysight N777 C Series Programming Guide

Keysight N777xC Series Tunable Laser Family Programming Guide 75
Measurement Operations & Settings 4
Response: None
Example: :sour0:sour0:wav:swe:soft
Affects: All N777xC tunable laser sources
Command: :SOURce0:WAVelength:SWEep:SPEed
Syntax: :SOURce0:WAVelength:SWEep:SPEed<wsp><speed>[NM/S|UM/S|MM/S|M/S|MIN|MAX]
Description: Sets the speed for continuous sweeping.
Cannot be set while a sweep is running.
Parameters: Speed as a float value in meters per second (m/s).
Response: none
Example: :sour0:wav:swe:spe 10nm/s
Affects: All tunable laser modules that support continuous sweeps.
Command: :SOURce0:WAVelength:SWEep:SPEed?
Syntax: :SOURce0:WAVelength:SWEep:SPEed? [MIN|MAX]
Description: Returns the speed for continuous sweeping.
Parameters: None
Response: None
Example: :sour0:wav:swe:spe? +8.00000000e-08
Affects: All tunable laser modules that support continuous sweeps.
Command: :SOURce0:WAVelength:SWEep:STARt
Syntax: :SOURce0:WAVelength:SWEep:STARt<wsp><startvalue>[PM|NM|UM|MM|M|MIN|MAX]
Description: Sets the starting point of the sweep.
Cannot be set while a sweep is running.

Keysight N777 C Series Specifications

General

Brand	Keysight
Model	N777 C Series
Category	Measuring Instruments
Language	English