44 Keysight N9927-90001 User’s Guide
CAT (Cable and Antenna Test) Mode
Procedures
See Also
“Return Loss Measurements” on page 53
“1-Port Cable Loss Measurements” on page 53
“2-Port Insertion Loss Measurements” on page 55
Chapter 8, “Calibration for NA, CAT, and VVM Modes”, on page 119
“All about Markers” on page 446
“All about Limit Lines” on page 461
“All about Trace Math” on page 466
Making 75Ω (ohm) Measurements at the FieldFox Supplemental Online Help:
http://na.support.keysight.com/fieldfox/help/SupHelp/FieldFox.htm
To Next Page
Loading...
