534 Keysight N9927-90001 User’s Guide
Safety Considerations
Battery Protective Functions
Battery Protective Functions
The following protective functions are designed into the lithium-ion
rechargeable battery system used in FieldFox.
Do not carry or store the battery with necklaces, hairpins, or other
metal objects.
Do not pierce the battery with nails, strike the battery with a
hammer, step on the battery, or otherwise subject it to strong
impacts or shocks.
Do not solder directly onto the battery.
Do not expose the battery to water or salt water, or allow the
battery to get wet.
Do not disassemble or modify the battery. The battery contains
safety and protection devices, which if damaged, may cause the
battery to generate heat, explode, or ignite.
Do not place the battery in direct sunlight, or use or store the
battery inside cars in hot weather. Doing so may cause the battery
to generate heat, explode, or ignite. Using the battery in this
manner may also result in a loss of performance and a shortened
life expectancy.
There is a danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type of battery
recommended. Discard used batteries according to manufacturer’s
instructions.
If you are charging the batteries internally, even while the FieldFox
is powered off, the FieldFox may become warm. Allow for proper
ventilation.
Do not discharge the battery using any device except the FieldFox
or the external battery charger (N9910X–872). When the battery is
used in a device other than those specified, it may damage the
battery or reduce its life expectancy. If the device causes an
abnormal current to flow, it may cause the battery to become hot,
explode, or ignite and cause serious injury.
For a Korean battery safety consideration translation, refer to
Appendix D:, “Korean Battery Safety Translation.”
To Next Page
Loading...
