Keysight PNA Series User Manual

Measurement options
The following is a list of measurement options that are supported with the N5251A
or the individually congured PNA/PNA-X solution. These measurement options are
supported across the 10 MHz to 110 GHz frequency range and are required if using the
N5227A PNA or N5247A PNA-X.
For additional measurement options that are currently only supported up to 67 GHz on
the N5227A or N5247A, please refer to the Keysight Network Analyzer Conguration
Guide, literature number 5990-7745EN.
Options Supported options
010 Time domain measurement
082 Scalar-calibrated converter measurements
083 Scalar-calibrated converter measurements with phase
460 Integrated true differential stimulus
087 Spectrum power measurements
008 Pulse application
080 Frequency offset mode
021 Add pulse modulator to internal 1st source
022 Add pulse modulator to internal 2nd source
025 Add internal 4 pulse generators
118 Fast CW mode
Broadband Solution Conguration
13 | Keysight | Antenna Test – Selection Guide

Keysight PNA Series Specifications

General

Number of Ports	2, 4
Impedance	50 Ω
Output Power Range	-55 dBm to +13 dBm (varies by model)
Dimensions	Varies by model
Weight	Varies by model
Power Requirements	100-240 VAC, 50/60 Hz
Storage Temperature	-40°C to 70°C