Keysight PXA N9030A - Page 187

4 Input/Output Functions
Input/Output
Key Path
Input/Output, Corrections, Properties, Antenna Unit
Example :CORR:CSET:ANT UVM
Readback "dBµV/m"
Initial S/W Revision A.02.00
dBµA/m
Sets the antenna unit to dBµA/m. If this correction is turned on, and Apply Corrections is on, the Y Axis Unit
will then be forced to dBµA/m and all other Y Axis Unit selections will be grayed out.
Key Path
Input/Output, Corrections, Properties, Antenna Unit
Example :CORR:CSET:ANT UVA
Readback "dBµA/m"
Initial S/W Revision A.02.00
dBpT
Sets the antenna unit to dBpT. If this correction is turned on, and Apply Corrections is on, the Y Axis Unit
will then be forced to dBpT and all other Y Axis Unit selections will be grayed out.
Key Path
Input/Output, Corrections, Properties, Antenna Unit
Example :CORR:CSET:ANT PTES
Readback "dBpT"
Initial S/W Revision A.02.00
dBG
Sets the antenna unit to dBG. If this correction is turned on, and Apply Corrections is on, the Y Axis Unit will
then be forced to dBG and all other Y Axis Unit selections will be grayed out.
Key Path
Input/Output, Corrections, Properties, Antenna Unit
Example :CORR:CSET:ANT GAUS
Readback "dBG"
Initial S/W Revision A.02.00
dBµA
Sets the antenna unit to dBµA. If this correction is turned on, and Apply Corrections is on, the Y Axis Unit
will then be forced to dBµA and all other Y Axis Unit selections will be grayed out.
EMI Receiver Mode Reference 187