9 Strip Chart Measurement
Sweep/Control
Sweep/Control
Accesses a menu that enables you to stop and start the measurement.
Key Path
Front-panel key
Notes Front panel only.
Initial S/W Revision A.07.00
Stop / Start
Enables you to stop a measurement. When stopped, the label on the key changes to Start. Press the
Resume, Restart or Cont key to resume the measurement.
Key Path
Sweep/ Control
Remote Command
[:SENSe]:SCHart:ABORt
Example SCH:ABOR
Initial S/W Revision A.07.00
Key Path
Sweep/ Control
Remote Command
:INITiate:IMMediate
:INITiate:RESTart
Example INIT:IMM
INIT:REST
Initial S/W Revision A.07.00
706 EMI Receiver Mode Reference
To Next Page
Loading...
