Keysight PXA N9030A - Page 559

8 Frequency Scan Measurement
Save
Edit Header
This key enables you to edit the trace file header information.
Key Path
Save, Export Data, Meas Result, Trace
Initial S/W Revision A.10.00
Title
Provides a title of up to 200 characters by which you can easily identify the Trace. The descriptions will be
stored in the exported Trace file as a title and can be displayed in the active function area by selecting them
as the active function, if desired to be in a screen capture.
Key Path
Save, Export Data, Meas Result, Trace, Edit Header
Remote Command
:MMEMory:TRACe:TITLe “string”
:MMEMory:TRACe:TITLe?
:MMEMory:TRACe:TITLe:STATe ON|OFF|1|0
:MMEMory:TRACe:TITLe:STATe?
Example :MMEM:TRAC:TITL “Advanced Company EMC Report”
:MMEM:TRAC:TITL:STAT ON
Preset “” (null String), not affected by Mode Preset, preset by Restore Mode Defaults.
State Saved Saved in instrument state
Initial S/W Revision A.10.00
Client
Provides the Client information of up to 100 characters. The descriptions will be stored in the exported
Trace file as a Client field and can be displayed in the active function area by selecting them as the active
function, if desired to be in a screen capture.
Key Path
Save, Export Data, Meas Result, Trace, Edit Header
Remote Command
:MMEMory:TRACe:CLIent “string”
:MMEMory:TRACe:CLIent?
:MMEMory:TRACe:CLIent:STATe ON|OFF|1|0
:MMEMory:TRACe:CLIent:STATe?
Example :MMEM:TRAC:CLI “XYZ Corp Limited”
:MMEM:TRAC:CLI:STAT ON
Preset “” (null String), not affected by Mode Preset, preset by Restore Mode Defaults.
State Saved Saved in instrument state
Initial S/W Revision A.10.00
EMI Receiver Mode Reference 559