3 Programming the Analyzer
List of SCPI Commands
SYSTem:PON:MODE SA | BASIC | ADEMOD | NFIGURE | PNOISE | CDMA2K | TDSCDMA
| VSA | VSA89601 | WCDMA | WIMAXOFDMA
SYSTem:PON:MODE?
SYSTem:PON:TIME?
SYSTem:PON:TYPE MODE | USER | LAST
SYSTem:PON:TYPE PRESet
SYSTem:PON:TYPE?
SYSTem:PRESet
SYSTem:PRESet:USER
SYSTem:PRESet:USER:ALL
SYSTem:PRESet:USER:SAVE
SYSTem:PRINt:THEMe TDColor | TDMonochrome | FCOLor | FMONochrome
SYSTem:PRINt:THEMe?
SYSTem:PUP:PROCess
SYSTem:SECurity:USB:WPRotect[:ENABle] ON | OFF | 0 | 1
SYSTem:SECurity:USB:WPRotect[:ENABle]?
SYSTem:SHOW OFF | ERRor | SYSTem | HARDware | LXI | HWSTatistics |
ALIGnment | SOFTware | CAPPlication
SYSTem:SHOW?
SYSTem:TEMPerature:HEXTreme?
SYSTem:TEMPerature:LEXTreme?
SYSTem:TIME "<hour>, <minute>, <second>"
SYSTem:TIME?
SYSTem:VERSion?
TRACe:APD[:DATA]? MEAS | MEAS2 | ELIMit
TRACe[1]|2|3:APD:DISPlay[:STATe] ON | OFF | 0 | 1
TRACe[1]|2|3:APD:DISPlay[:STATe]?
TRACe[1]|2|3:APD:UPDate[:STATe] ON | OFF | 0 | 1
TRACe[1]|2|3:APD:UPDate[:STATe]?
TRACe[:DATA]
TRACe[:DATA] TRACE1 | TRACE2 | TRACE3
TRACe[:DATA]? TRACE1 | TRACE2 | TRACE3
TRACe[:DATA]?
TRACe[:DATA]?
TRACe:FEED:CONTrol ALWays | NEVer
TRACe:FEED:CONTrol?
TRACe:FSCan:COPY TRACE1|TRACE2|TRACE3, ...
TRACe:FSCan[:DATA] TRACE1 | TRACE2 | TRACE3, <data>
TRACe:FSCan[:DATA]? TRACE1 | TRACE2 | TRACE3 | SCAN | SINGle
TRACe[1]|2|3:FSCan:DISPlay ON | OFF | 1 | 0
TRACe[1]|2|3:FSCan:DISPlay ?
TRACe:FSCan:EXCHange TRACE1|TRACE2|TRACE3, ...
TRACe[1]|2|3:FSCan:UPDate ON | OFF | 1 | 0
TRACe[1]|2|3:FSCan:UPDate?
TRACe:MONitor:COPY TRACE1|TRACE2|TRACE3, ...
TRACe:MONitor[:DATA] TRACE1 | TRACE2 | TRACE3, <data>
TRACe:MONitor[:DATA]? TRACE1 | TRACE2 | TRACE3 | SINGle
TRACe[1]|2|3:MONitor:DISPlay[:STATe] ON | OFF | 0 | 1
TRACe[1]|2|3:MONitor:DISPlay[:STATe]?
TRACe[1]|2|3:MONitor:TYPE WRITe | AVERage | MAXHold | MINHold
TRACe[1]|2|3:MONitor:TYPE?
TRACe[1]|2|3:MONitor:UPDate[:STATe] ON | OFF | 0 | 1
TRACe[1]|2|3:MONitor:UPDate[:STATe]?
EMI Receiver Mode Reference 95
To Next Page
Loading...
