Keysight U1272A - Enabling and Disabling the Overvoltage Alert; Figure 4-10 Alert Display

4 Multimeter Setup Options
Setup Menu Items
140 U1271A/U1272A User’s Guide
Enabling and disabling the overvoltage alert
This setting is used with the multimeter’s overvoltage alert
(see page 28). The multimeter’s will start beeping
periodically once the measured voltage exceeds the value set,
regardless of polarity.
To enable the overvoltage’s alert:
1 Press for more than 1 second to enter the
multimeter’s setup menu.
2 Press or until is shown on the
secondary display.
Figure 4-10 ALErt display
3 Press or to set the overvoltage alert level. Select
to disable the overvoltage alert feature.
4 Press to save your changes or press to
discard your changes.
5 Press and hold until the multimeter restarts to return
to normal operation.
Parameter Range Default setting
ALErt (0.1 to 1010) V or Off Off
Setup
P
e
a
k
M
a
x
M
i
n
A
u
t
o
R
a
n
g
e
Exit
Dual
Setup
H
z
%
m
s
L
o
g
S
h
i
f
t
V
i
e
w
E
s
c
Setup