Keysight U1272A - Changing the User Scale Conversion Value and Unit; Figure 4-19 Smooth Display

Multimeter Setup Options 4
Setup Menu Items
U1271A/U1272A User’s Guide 149
5 Press and hold until the multimeter restarts to return
to normal operation.
Changing the user scale conversion value and unit
You can set the user scale conversion value and unit. The
ratio can be set from 0000.1 to 1000.0 and the unit can be
set to V/V, A/V, or 000 (no unit)/V. The default is
1000 V/V. See “Making Scale Transfers (Scale)” on page 110
for more information on the Scale operation.
To set the user scale conversion value and unit:
1 Press for more than 1 second to enter the
multimeter’s setup menu.
2 Press or until is shown on the
secondary display.
Figure 4-19 SMootH display
3 Press or to set the scale conversion value. Move
the cursor to the unit indicator (right- most) to change the
scale conversion unit.
Setup
Parameter Range Default setting
Scale USEr (0000.1 to 1000.0) V/V, A/V, or
000 (no unit)/V
(1000.0) V/V
Setup
P
e
a
k
M
a
x
M
i
n
A
u
t
o
R
a
n
g
e
Exit
Dual
Setup