Keysight U1281A - Performance Verification Tests; Table 1-2 DC V (V) Performance Verification Tests

Calibration Procedures 1
Keysight U1281A/U1282A Service Guide 27
Performance Verification Tests
Use the performance verification tests to verify the measurement performance of
the multimeter. The performance verification tests use the multimeter’s
specifications listed in the U1281A/U1282A Data Sheet (available for download at
http://literature.cdn.keysight.com/litweb/pdf/5992-0847EN.pdf).
The performance verification tests are recommended as acceptance tests when
you first receive the multimeter. The acceptance test results should be compared
against the 1-year test limits. After acceptance, you should repeat the
performance verification tests at every calibration interval.
If the multimeter fails the performance verification tests, adjustment or repair is
required.
NOTE
Ensure that you have read the “Test Considerations” on page 26 before running
the performance verification tests.
Table 1-2 DC V (V) performance verification tests
Test function Range
5520A/5522A
output
Error from nominal 1 year
U1281A U1282A
DC V (V)
Turn the rotary switch to the position.
6 V 6 V ±0.0020 V ±0.0020 V
60 V 60 V ±0.020 V ±0.020 V
600 V 600 V ±0.20 V ±0.20 V
1000 V 1000 V ±0.75 V ±0.75 V
V