Kikkoman Lumitester PD-30 - Saving Memory Data to File

21 22
3.4.2 Saving Memory Data in File
①Click the "Save File (CSV)" or "Save File (JPEG)" button.
②Specify the save destination and le name, then click the "Save" button.
<File in CSV Format File>
rThe default le name is [serial number of PD-30] + [date of saving].
rYou can process data using functions of a spreadsheet software.
Display the model. Display the serial number of PD-30.
Display the date on which the le
was saved.
The default le name is [serial number
of PD-30] + [date of saving].
-01-
<File in JPEG Format File>
rThe default le name is [serial number of PD-30] + [date of saving].
rEach le name is suxed by an auto-assigned le number. File numbers start
with 01.
rOne le saves up to 38 pieces of memory data.
Therefore, if you save 2000 pieces of data, 53 les will be created.
Caution
The control software saves les in JPEG format with necessary and sucient image quality.
However, some image reader software may not display or print images with sucient
image quality. In such case, replace the image reader software with another one.
Display the serial number of PD-30. Display the model. Display the date on which the le was saved.
Display the number of les.