Kikkoman Lumitester PD-30 - Printing Memory Data; Memory Data Clear; Summarizing Memory Data

23 24
Caution
All the PD-30 memory data is deleted.
After Memory Data is deleted the memory data cannot be recovered.
It is impossible to clear only a part of the memory data.
3.4.3 Printing Memory Data
Click the "Print" button.
The data is printed in JPEG format.
3.4.4 Memory Data Clear
①Click the "Delete Data" button.
②Click "Yes" to delete all memory data.
3.4.5 Summarizing Memory Data
Extract memory data meeting specied conditions from loaded memory data in
3.4.1 for display or graph representation.
①Click the "Summarize" button.
②Specify extraction conditions and click the "Extraction" button.
③Only extracted memory data is displayed.
④Create a bar chart, line chart or circular chart
according to the extracted data as needed.
rThe top of the drop-down list is blank. When the blank is selected, all data are
extracted without any conditions.
Execute extraction.
Clear the extraction conditions.
Cancel extraction.
End Summary.
Make bar graph.
Make line graph.
Make circular chart.
Redo Summary.
Select date from the calendar.
Select a PLAN name from the drop-down list.
Click a check box to select.
To extract only one MODE number or
PLAN number., enter an extraction
number to both cells.
Bar Graph Displays the average measured value at each Object.
Extraction conditions are displayed. The average of measured values at each Object is displayed
End vertical enlargement. Move upward.
Print the graph.
Move to the right.
Copy the graph on the clip board.
Close the graph.
Enclosing the area with the left mouse
button pressed enlarges its area.
Information on the measured data before
Summarizing and information on the
measured data after Summarizing is displayed.
The group is displayed under the measurement object.
One group marked with an arrow continues until the next group.
Move downward.
End horizontal enlargement.
Move to the left.