Kikkoman Lumitester PD-30 - Date and Time Settings; User Name Input; PLAN Measurement Setup; Level Set Configuration

13 14
3.2.2 Date/Time Set
Click year/month/day/hour/minute and use up and down buttons to change it.
Or enter the date directly.
Load the Date/Time from PD-30
Set the Date/Time to PD-30
Select a date format.
3.2.3 User Name Input
rThe maximum number of characters for user name is 14.
rThe default le name is [serial number of PD-30] + [date of saving]+user.
rThe data is printed in JPEG format.
Load the user names form the
PD-30.
Write the user names to the
PD-30
Save the user names in CSV
format.
Save the user names in JPEG
format.
Print the user names.
Enter user names in the cells.
Display the serial number of PD-30.
3.3.1 Level Set
You can start PLAN setting by setting the level set in which level 1, level 2, object
name, and group name that manages multiple MODE numbers as a group have
been input.
Enter level 1 and level 2 that are used as rank judgment criteria, object name, and
group name in the table. In this example, zeros are entered for level 1 and level 2
for the Present Survey group without rank judgment, and corresponding
numerical values are entered for Low Level to High Level groups.
After inputs, press the write button to write the levels to the PD-30.
3.3 PLAN measurement
While the PD-30 unit only provides [MODE Measurement] in which MODE numbers
with dierent judgment level inputs are switched for measurement, this software
allows you to use [PLAN Measurement] in which multiple objects can be handled
as a series of tests.
Although PLAN measurement can be used in many ways, you rst need to set a
PLAN according to the purpose of your test. This section describes how to set a
PLAN for ve objects (Object 01, Object 02, Object 03, Object 04, Object 05) with
an example of 4-step test scenes [Present Survey, Low Level, Middle Level, High
Level]. (The Levels (Low Level to High Level) represent the site cleaning levels of
the object.)
Click the MODE (uppermost) cell to select all MODE numbers.
Load the Level values from the PD-30.
Write the Level values to the PD-30.
Save the Level values in CSV format.
Save the Level values in JPEG format.
Print the Level values.
Display the measurement method.
Display the serial number.
Click the MODE number checkbox
to select the number.
Selected (checked) MODE
numbers become the write targets.