Kikkoman Lumitester PD-30 - Product Information Screen; Error Message Guide

29 30
3.6 Product Information Screen
The software shows the version information of the control software.
<Error Write Level>
If a value smaller than Level 1 is entered for Level 2 and written to the PD-30, the
following screen and the mode number cell where wrong numbers are entered
appear. In this case, reenter Level values.
Also, if Level 1 or Level 2 is in blank, the error indication appears. In this case, enter
“0” in Level 1 and Level 2 if the Level set is not necessary.
<Error Load Data>
When the following screen appears, data is failing to be loaded.
Check the connection status and then click “Load” button again.
<Error when no memory data is available>
If you click “Load” button when no memory data is available, the following screen
will appear.
3.7 Error Message
<Error connecting via USB>
When the following screen appears, the USB connector may be disconnected or poorly connected.
Make sure that the USB connector is properly connected.